Description
The Eris Pro 6 is a 2-way, biamped active studio monitor designed to reproduce mixes with lifelike realism and precise imaging. The coaxial single point-source design aligns the acoustic center of the tweeter and woofer to reduce phase anomalies and widen the usable sweet spot. This monitor is suitable for stereo and immersive mixing environments that demand accurate spatial cues.
The Eris Pro 6 pairs a 1.25-inch silk-dome tweeter with a 6.5-inch woven-composite woofer to deliver clear highs and a tight, punchy low end. The Class AB amplification supplies 140 watts total, split into 65 watts for HF and 75 watts for LF, enabling high dynamic output without excessive distortion. The horn-loaded coaxial architecture provides coherent dispersion and improved transient response across the band.
Frequency response extends from 35 Hz to 20 kHz and peak SPL reaches 106 dB at 1 meter, making the Eris Pro 6 capable of detailed nearfield monitoring and louder mix-check listening. The internal crossover is set at 3.2 kHz to balance the drivers and maintain phase coherence. Protections include RF interference suppression, output-current limiting, over-temperature protection, turn-on/off transient protection, and a subsonic filter to safeguard the drivers and amplifier.
Acoustic tuning controls allow precise adaptation to room placement and acoustic boundaries. Acoustic Space offers Flat, -2 dB, and -4 dB settings to compensate for wall or corner placement. A continuously variable high-frequency control (±6 dB centered at 10 kHz), mid-frequency control (±6 dB centered at 1 kHz), and selectable low-cut filters (Flat, 80 Hz, 100 Hz at -12 dB/octave) enable tailored response correction.
Connectivity is flexible with balanced XLR and 1/4-inch TRS inputs plus an unbalanced RCA input for consumer sources. The monitor supports common studio interfaces including audio interfaces, mixers, and consumer playback devices without adapters. Additional integration features include wall and ceiling mounting provisions and an IEC power input with worldwide voltage compatibility of 100-240 VAC at 50-60 Hz.
Built from vinyl-laminated MDF, the Eris Pro 6 cabinet balances acoustic rigidity and controlled resonance for reliable monitoring performance. A Power Saver mode engages after 40 minutes of inactivity to reduce energy use and extend component life. Overall, the Eris Pro 6 provides a coherent single point-source sound, tunable response, and robust protection for professional and home studio monitoring needs.