Description
4K/UHD @ 60Hz KVM Receiver over IP, HDMI output, USB Mouse & Keyboard and USB 2.0 over Gigabit Ethernet in fiber and copper mode. Up to 170 meters (Point to point), 100 meters (from a GigE switch) in copper mode. Up to 10 Km in fiber mode. Powered by POE, power supply is not included
Features
- Based on Gigabit Ethernet Technology (IGMP and Jumbo frame)
- Supports HDR 10/10+, HDCP 2.2/2.3
- Supports USB 2.0 over IP
- Supports AES 265 encryption
- Low latency of 17 ms for 60Hz, 20 ms for 50Hz
- Transmitter has built-in HDMI looping input
- Supports up to 170 meters point to point extension with CAT6 cable in Copper Mode
- Supports up to 100 meters when used with a GigE switch in Copper Mode
- Supports up to 10 Km in Fiber Mode
- Supports HDMI inputs and output signals
- Supports point to point (Unicast), point to multi-point (Multicast) for Audio/Video distribution
- Receiver has 5 USB-A ports that supports HID, tablets, storage, etc. and one independent USB2.0 link
- Supports analog stereo audio in point to point mode. Both embedded HDMI as well as external stereo input
- Supports RS-232 communication between Tx and Rx
- Built-in web-page for configuration
- Connection manager software – KVM matrix control panel
- Supports resolutions up to UHD @ 60Hz
- Advanced EDID management functionality. Built-in EDID list or EDID from the display
- Built-in Scaler on the receivers
- Two Ethernet connections via RJ45 and SFP. When both are active, it can work as redundant network.
- Optional POE. POE and external adapter can also work as redundant power supplies
Front View
- Link/System Status
- Reset
- Status LEDs
- GPIO (TBA)
- Link Start/Stop
- Button Reserved
- Device USB x 2
- Keyboard and mouse USB
- Transparent USB
Rear View
- 2V DC
- SFP Cage with 1 GigE fiber SFP
- Status LEDs
- Ethernet
- HDMI Loopout
- SPDIF In
- Audio Out/In
- Infrared Out/In
- RS-232