Description
KVM Receiver over IP, HDMI output, USB Mouse & Keyboard and USB 2.0 over Gigabit Ethernet, up to 170 meters (Point to point), 100 meters (from a GigE switch) up to 4K/UHD @ 60Hz. Powered by POE, power supply is not included
Features
- Based on Gigabit Ethernet Technology (IGMP and Jumbo frame)
- Supports HDR 10/10+, HDCP 2.2/2.3
- Supports USB 2.0 over IP
- Supports AES 265 encryption
- Low latency of 17 ms for 60Hz, 20 ms for 50Hz
- Transmitter has built-in HDMI looping input
- Supports up to 170 meters point to point extension with CAT6 cable
- Supports up to 100 meters when used with a GigE switch
- Supports HDMI inputs and output signals
- Supports point to point (Unicast), point to multi-point (Multicast) for Audio/Video distribution
- Receiver has 3 USB ports that supports both HID and transparent USB (for USB storage, and tablets)
- Supports analog stereo audio in point to point mode. Both embedded HDMI as well as external stereo input
- Supports RS-232 communication between Tx and Rx
- Built-in web-page for configuration
- Connection manager software – KVM matrix control panel
- Supports resolutions up to UHD @ 60Hz
- Advanced EDID management functionality. Built-in EDID list or EDID from the display
- Built-in Scaler on the receivers
- POE Optional – Hardware option can be included at the time of order
Front View
- 2 x USB Type A (Keyboard/Mouse)
- 1 x USB Type (Transparent)
- RS-232
- Infrared In/out
- 1 x Audio out
- 1 x SPDIF In
- Link Start/Stop button
- Status LEDs
Rear View
- 1 x RJ45 Ethernet In
- 1 x HDMI Output
- 1 x 12V DC
- Reset